1/3 HP Antarctic Chiller | 35 - 60 Degrees F

Description

Discover an affordable option for your DIY project with this 1/3 horsepower chiller, perfect for chilling down to 32F. (Details for recommended gallonage provided.)

The 1/3 HP Antarctic Chiller will work for most cold plunges under 90 gallons, chilling your water to the high 30s. Adjust the temperature of your ice bath using the chiller unit's programmable integrated thermostat. The temperature readout is accurate to +/- 1 F. 

Note: We highly recommend purchasing a chiller one size larger than you think is necessary.

Key Features

• Quiet
• 4000 BTUs / 7.25 amps / 115V
• Single-stage controller
• Best cold plunge use at 90 gallons or below
• Recommended Pump Rate: The required flow through the chiller is between 480 gph and 2400 gph
• 2-Year warranty

Specifications

• 13.75" W x 15.75" H x 17.75" L
• 54 lbs
• 4000 BTUs / 7.25 amps / 115V
• The controller can be set as low as 32F
• 30 degree cooling up to 90 gallons. 
• 1/2", 3/4" or 5/8" Hose Barb Connections
• Titanium Heat Exchanger
• Anti-freezing system will not allow the heat exchanger to freeze
• Contains safe Ozone Friendly Refrigerant (R134-A)
• Integrated Thermostat – Simple keypad programmable display with constant temperature readout accurate to +/- 1 F.
• Chillers should not be placed in an enclosed area without adequate air flow
• Note: These temperature pull-down ratings are in ideal situations. We highly recommend purchasing a chiller one size larger than the specifications would lead you to believe is necessary.